Contact Now
Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Shaanxi Kaishi Biotechnology Co., Ltd
$20
1-199 Others
$15
200-499 Others
$10
≥500 Others
Product Description
Acetyl zingerone is a synthetic antioxidant ingredient developed for cosmetic and personal care formulations. Structurally related to zingerone, it is used in skincare research and formulation development for its potential to help protect cosmetic formulations and skin from oxidative stress associated with environmental exposure, making purity, stability, and compatibility important sourcing considerations.
Acetyl zingerone is an oil-compatible cosmetic active studied for antioxidant performance and its potential role in supporting skin protection against environmental stressors. It is primarily relevant to facial skincare, anti-aging product development, and multifunctional cosmetic systems where oxidative stability and formulation compatibility are key design considerations.
For procurement and formulation work, buyers should distinguish the ingredient's chemical identity and assay from finished-formula performance. Results can vary with concentration, delivery system, packaging, and the other ingredients in a formulation.
Acetyl zingerone is a zingerone-derived compound used as a cosmetic ingredient. Unlike botanical extracts, it is a defined chemical ingredient rather than a plant extract standardized by a variable mixture of constituents. Its suitability for a formulation should therefore be assessed through identity, purity, impurity profile, physical properties, and compatibility testing.
Acetyl zingerone is commonly discussed in cosmetic ingredient development for its antioxidant properties. Such ingredient-level properties should not be interpreted as proof that every finished product will deliver a particular clinical or consumer outcome.
| Item | Specification |
|---|---|
| Product Name | Acetyl Zingerone |
| Ingredient Category | Cosmetic active ingredient; antioxidant |
| CAS Number | 103883-03-6 |
| Molecular Formula | C12H14O4 |
| Molecular Weight | 222.24 g/mol |
| Appearance | Typically a white to off-white or pale yellow powder; confirm against the lot-specific specification |
| Assay / Purity | Cosmetic ingredient grades are commonly offered at high purity, often around 98% or above; the applicable release limit should be defined in the supplier specification |
| Identification | Suitable identity testing, such as FTIR, HPLC retention time, or another validated method |
| Assay Test Method | HPLC or another validated chromatographic method, as defined in the product specification |
| Solubility / Compatibility | Assess in the intended oil phase, solvent system, or finished formulation; compatibility depends on the formulation base and processing conditions |
| Particle Size | Grade-dependent; customized particle-size requirements may be discussed for specific formulation or manufacturing needs |
| Moisture / Residual Solvents | Controlled according to the applicable specification and relevant quality requirements |
| Heavy Metals and Related Impurities | Test limits and reporting should follow the applicable specification and intended market requirements |
| Shelf Life | A 24-month shelf life is a common commercial target for properly packaged Cosmetic Raw Materials; use the actual labeled shelf life for the supplied lot |
| Storage | Store tightly sealed in a cool, dry place, protected from direct light, heat, and moisture; follow the supplier's handling instructions |
| Packaging | Common options include sealed foil bags or inner liners in protective outer containers; 1 kg and 5 kg packs and larger bulk packaging may be arranged according to order requirements |
| Documentation | COA, specification sheet, SDS, and relevant technical documents according to the supplied grade and order requirements |
| Intended Use | Cosmetic formulation development and personal care ingredient applications; confirm regulatory status for the destination market |
Acetyl zingerone may be evaluated in facial serums and creams designed around antioxidant and environmental-stress skincare positioning. Formulators should establish a suitable incorporation method and verify that the ingredient remains uniformly distributed and stable throughout the product's intended shelf life.
It may be included in cosmetic concepts targeting the appearance of skin affected by everyday environmental exposure. Claims relating to visible skin benefits should be supported by appropriate finished-product evidence rather than inferred solely from ingredient-level research.
Acetyl zingerone can be evaluated alongside other cosmetic actives in multifunctional products. Compatibility, color, odor, pH, processing temperature, packaging interactions, and long-term stability should be assessed for the complete formulation.
Research and development teams can use a defined acetyl zingerone grade to evaluate concentration, delivery systems, formulation compatibility, and stability under their own development protocols.
For acetyl zingerone, the main procurement question is not simply whether the assay is high. Buyers should determine whether the analytical specification, physical form, and formulation behavior fit the intended product and manufacturing process.
| Decision Factor | What to Check | Why It Matters |
|---|---|---|
| Identity and Assay | CAS identity, analytical method, assay basis, and release limits | Confirms that the purchased material meets the intended chemical and purity requirements. |
| Impurity Profile | Related substances, residual solvents, and other specification-controlled impurities | Supports raw-material qualification and consistency across incoming lots. |
| Physical Form | Appearance, particle-size expectations, handling, and dispersion behavior | Influences weighing, transfer, incorporation, and manufacturing repeatability. |
| Formulation Compatibility | Solubility in the intended carrier or phase, processing conditions, and interaction with other actives | Helps avoid precipitation, uneven distribution, or instability in the finished product. |
| Stability and Packaging | Recommended storage, packaging barrier, light exposure, and shelf-life support | Helps maintain raw-material quality during storage, transport, and routine manufacturing. |
| Market and Documentation | COA, SDS, specification sheet, and destination-market ingredient requirements | Supports internal quality approval and regulatory review before commercial launch. |
Practical sourcing note: A higher assay does not by itself guarantee better performance in a finished skincare product. Confirm the assay method and impurity limits, then run a small-scale compatibility and stability assessment in the actual formulation base before fixing the purchasing specification for production.
Acetyl zingerone can be packed in sealed inner packaging with a protective outer container to reduce exposure to moisture and handling contamination. Common commercial pack formats include 1 kg and 5 kg packs, with larger bulk options for production-scale purchasing. Actual pack size, container type, and minimum order quantity depend on the supply arrangement.
Keep the material tightly sealed in a cool, dry place and protect it from direct light and excessive heat. After opening, reseal the package promptly and minimize repeated exposure to ambient moisture. Follow the lot-specific storage and shelf-life instructions supplied with the material.
Acetyl zingerone may be considered for cosmetic raw-material supply, custom packaging, and private-label or contract-manufacturing projects where the product scope supports these services. Requirements can include grade selection, pack-size planning, documentation review, and coordination with a formulator or manufacturing partner. Final product claims, ingredient labeling, and market compliance should be reviewed for the destination market.
Incoming material qualification should be based on a defined specification and lot-specific documentation. A suitable quality review may include identity confirmation, chromatographic assay, related-substance evaluation, appearance, and other controls required by the purchasing specification. Additional testing should be selected according to the intended application, risk assessment, and destination-market requirements.
Before production approval, compare the COA with the agreed specification, review the SDS and handling instructions, and conduct formulation compatibility and stability testing where appropriate. A supplier's general product description should not replace the actual batch documentation.
Acetyl zingerone is used in cosmetic formulation development for its antioxidant properties and potential role in environmental-stress skincare concepts. It may be evaluated in serums, creams, and other personal care products. Finished-product claims should be supported by relevant evidence, and ingredient compatibility should be assessed in the intended formulation.
Quality assessment commonly considers chemical identity, assay by HPLC or another validated method, related substances, appearance, and specification-controlled impurities. The exact tests and acceptance limits should be stated in the product specification and verified against the COA for each supplied lot.
No single ingredient is automatically compatible with every cosmetic base. Solubility, dispersion, processing temperature, pH, packaging interactions, and the presence of other actives can affect performance. Conduct bench-scale compatibility and stability tests in the intended formulation before selecting a commercial use level or manufacturing process.
Buyers commonly request a lot-specific COA, product specification, SDS, and relevant technical information. Depending on the market and intended use, additional documentation or testing may be needed. Review the applicable ingredient regulations and labeling requirements before launching a finished cosmetic product.
Acetyl zingerone is a defined cosmetic ingredient for formulators exploring antioxidant-focused skincare systems. Effective sourcing requires more than an assay figure: chemical identity, impurity controls, physical handling, formulation compatibility, storage, and batch documentation all contribute to reliable raw-material qualification. Contact us today to request samples, a COA, technical documents, and a wholesale quotation.
Packaging & Delivery
The file is encrypted. Please fill in the following information to continue accessing it
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.